Lexmark C9235 User Manual Download Page 91

Page: 91 / 246

Menu item

Description

Minimum Password Length

0–32

Specify the password length.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Reports

Menu Settings Page

Menu item

Description

Menu Settings Page

Print a report that contains the printer menus.

Device

Menu item

Description

Device Information

Print a report that contains information about the printer.

Device Statistics

Print a report about printer usage and supply status.

Proﬁle List

Print a list of proﬁles that are stored in the printer.

Asset Report

Print a report that contains the printer serial number and model name.

Print

Menu item

Description

Print Fonts

PCL Fonts

PS Fonts

Print samples and information about the fonts that are available in each printer
language.

Print Directory

Print the resources that are stored in the ﬂash drive or hard disk.

Note:

This menu item appears only when a ﬂash drive or hard disk is

installed.

Network

Menu item

Description

Network Setup Page

Print a page that shows the conﬁgured network and wireless settings on the
printer.

Note:

This menu item appears only in network printers or printers connected

to print servers.

‑

Fi Direct Connected Clients

Print a page that shows the list of devices that are connected to the printer using
Wi

‑

Fi Direct.

Note:

This menu item appears only when Enable Wi

‑

Fi Direct is set to On.

Understanding the printer menus

Summary of Contents for C9235























































































































































































































































Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands

Lexmark C9235, User Manual

Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands