Lexmark C9235 User Manual Download Page 31

Page: 31 / 246

•

Make sure that the paper stacks do not cross the divider. Push each paper stack against the sides of the
tray.

Insert the tray.

From the control panel, navigate to:

Settings

Device

Maintenance

Conﬁguration Menu

Tray

Conﬁguration

Size Sensing

Select the tray and paper size.

Loading the 3000

‑

sheet tray

The 3000

‑

sheet tray supports only one paper size, either A4 or letter.

CAUTION—TIPPING HAZARD:

To reduce the risk of equipment instability, load each tray separately.

Keep all other trays closed until needed.

Open door F, and then lift the feed roller.

Warning—Potential Damage:

To avoid damage and poor performance, do not touch the feed rollers.

Loading paper and specialty media

Summary of Contents for C9235























































































































































































































































Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands

Lexmark C9235, User Manual

Search results

Summary of Contents for C9235

Reviews:

Related manuals for C9235

Brands by name

Popular brands