LevelOne GEP-5070, User Manual

Page: 74 / 318

C
HAPTER
4
| Configuring the Switch
Configuring Security
– 74 –
◆
Privacy Protocol - The encryption algorithm use for data privacy; only
56-bit DES is currently available. (Options: None, DES; Default: DES)
◆
Privacy Password - A string identifying the privacy pass phrase.
(Range: 8-40 characters, ASCII characters 33-126 only)
W
EB
I
NTERFACE
To configure SNMPv3 users:
1.
Click Advanced Configuration, Security, Switch, SNMP, Users.
2.
Click “Add new user” to configure a user name.
3.
Enter a remote Engine ID of up to 64 hexadecimal characters
4.
Define the user name, security level, authentication and privacy
settings.
5.
Click Save.
Figure 21: SNMPv3 User Configuration
C
ONFIGURING
SNMP
V
3 G
ROUPS
Use the SNMPv3 Group Configuration page to configure SNMPv3 groups.
An SNMPv3 group defines the access policy for assigned users, restricting
them to specific read and write views as defined on the SNMPv3 Access
Configuration page ( page 76 ). You can use the pre-defined default groups,
or create a new group and the views authorized for that group.
P
ATH
Advanced Configuration, Security, Switch, SNMP, Groups
P
ARAMETERS
These parameters are displayed:
◆
Security Model - The user security model. (Options: SNMP v1, v2c, or
the User-based Security Model – usm).
◆
Security Name - The name of a user connecting to the SNMP agent.
(Range: 1-32 characters, ASCII characters 33-126 only)
The options displayed for this parameter depend on the selected
Security Model. For SNMP v1 and v2c, the switch displays the names
configured on the SNMPv3 Communities Configuration menu (see
page 72 ). For USM (or SNMPv3), the switch displays the names
configured with the local engine ID in the SNMPv3 Users Configuration