LevelOne GEP-5070, User Manual

Page: 170 / 318

C
HAPTER
4
| Configuring the Switch
Configuring the MAC Address Table
– 170 –
◆
Maximum Power - The maximum power that can be delivered to a
remote device. (Range: 0-34.2 Watts depending on the PoE mode)
W
EB
I
NTERFACE
To configure global and port-specific PoE settings:
1.
Click Advanced Configuration, PoE.
2.
Set the global PoE parameters, including the method used to determine
reserved port power, the method by which port power is shut down,
and the switch’s overall power budget.
3.
Specify the port PoE operating mode, port power allocation priority, and
the port power budget.
4.
Click Save.
Figure 64: Configuring PoE Settings
C
ONFIGURING THE
MAC A
DDRESS
T
ABLE
Use the MAC Address Table Configuration page to configure dynamic
address learning or to assign static addresses to specific ports.
Switches store the addresses for all known devices. This information is
used to pass traffic directly between the inbound and outbound ports. All
the addresses learned by monitoring traffic are stored in the dynamic
address table. You can also manually configure static addresses that are
bound to a specific port.
P
ATH
Basic/Advanced Configuration, MAC Table