LevelOne GEP-5070, User Manual

Page: 225 / 318

C
HAPTER
5
| Monitoring the Switch
Displaying Information About Ports
– 225 –
◆
Q# Receive / Transmit – The number of packets received and
transmitted through the indicated queue.
W
EB
I
NTERFACE
To display the queue counters, click Monitor, Ports, QoS Statistics.
Figure 103: Queueing Counters
D
ISPLAYING
QCL
S
TATUS
Use the QoS Control List Status page to show the QCE entries configured
for different users or software modules, and whether or not there is a
conflict.
P
ATH
Monitor, Ports, QCL Status
P
ARAMETERS
These parameters are displayed:
◆
User – Indicates the user (static entry, software module, or conflicting
entry) of this QCE. The information displayed in this field depends on
the option selected in the drop-down list at the top of this page
(Combined, Static, Voice VLAN, Conflict).
◆
QCE# – QoS Control Entry index.
◆
Frame Type – Indicates the type of frame to look for in incoming
frames. Possible frame types are: Any, Ethernet, LLC, SNAP, IPv4, IPv6.
◆
Port - Port identifier.
◆
Action – Indicates the classification action taken on ingress frame if
the configured parameters are matched in the frame's content. If a
frame matches the QCE, the following actions will be taken:
■
Class (Classified QoS Class) – If a frame matches the QCE, it will be
put in the queue corresponding to the specified QoS class.
■
DP – The drop precedence level will be set to the specified value.
■
DSCP – The DSCP value will be set the specified value.