LevelOne GEP-5070, User Manual

Page: 65 / 318

C
HAPTER
4
| Configuring the Switch
Configuring Security
– 65 –
C
ONFIGURING
HTTPS
Use the HTTPS Configuration page to enable the Secure Hypertext Transfer
Protocol (HTTPS) over the Secure Socket Layer (SSL). HTTPS provides
secure access (i.e., an encrypted connection) to the switch's web interface.
P
ATH
Advanced Configuration, Security, Switch, HTTPS
U
SAGE
G
UIDELINES
◆
If you enable HTTPS, you must indicate this in the URL that you specify
in your browser: https:// device [: port-number ]
◆
When you start HTTPS, the connection is established in this way:
■
The client authenticates the server using the server's digital
certificate.
■
The client and server negotiate a set of security protocols to use for
the connection.
■
The client and server generate session keys for encrypting and
decrypting data.
■
The client and server establish a secure encrypted connection.
A padlock icon should appear in the status bar for Internet Explorer
5.x or above, and Mozilla Firefox 2.0.0.0 or above.
◆
The following web browsers and operating systems currently support
HTTPS:
P
ARAMETERS
These parameters are displayed:
◆
Mode - Enables HTTPS service on the switch. (Default: Enabled)
◆
Automatic Redirect - Sets the HTTPS redirect mode operation. When
enabled, management access to the HTTP web interface for the switch
are automatically redirected to HTTPS. (Default: Disabled)
W
EB
I
NTERFACE
To configure HTTPS:
1.
Click Advanced Configuration, HTTPS.
2.
Enable HTTPS if required and set the Automatic Redirect mode.
3.
Click Save.
Table 5: HTTPS System Support
Web Browser Operating System
Internet Explorer 5.0 or later Windows 98,NT (with service pack 6a),
Windows 2000, XP, Vista, 7, 8
Mozilla Firefox 2.0.0.0 or later Windows 2000, XP, Vista, 7, 8, Linux