LevelOne GEP-5070, User Manual

Page: 206 / 318

C
HAPTER
4
| Configuring the Switch
Quality of Service
– 206 –
W
EB
I
NTERFACE
To configure WRED:
1.
Click Configuration, QoS, WRED.
2.
Enable WRED on the priority queues as required.
3.
Set the minimum threshold below which no packets are dropped.
4.
Set the drop probabilities for DP levels 1 through 3 as a percentage.
5.
Click Save.
Figure 88: WRED Configuration
C
ONFIGURING
C
ONGESTION
M
ANAGEMENT
Use the Congestion Management page to specify whether or not to forward
traffic when the destination port is congested. Note that congestion
Management does not apply to priority 6 and 7, which are always allowed
to be forwarded.
P
ATH
Configuration, QoS, Congestion Management
P
ARAMETERS
These parameters are displayed:
◆ Mode - Specifies whether to enable or disable congestion
management. (Default: Enabled)
W
EB
I
NTERFACE
To configure WRED:
1.
Click Configuration, QoS, Congestion Management.
2.
Enable or disable congestion management as required.
3.
Click Save.