LevelOne GEP-5070, User Manual

Page: 43 / 318

C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 43 –
Group
Information
Displays active IGMP groups 263
IPv4 SFM
Information
Displays IGMP Source-Filtered Multicast information
including group, filtering mode (include or exclude), source
address, and type (allow or deny)
263
MLD Snooping Multicast Listener Discovery Snooping 264
Status Displays MLD querier status and protocol statistics 264
Group
Information
Displays active MLD groups 266
IPv6 SFM
Information
Displays MLD Source-Filtered Multicast information including
group, filtering mode (include or exclude), source address,
and type (allow or deny)
266
LLDP Link Layer Discovery Protocol 267
Neighbors Displays LLDP information about a remote device connected
to a port on this switch
267
LLDP-MED
Neighbors
Displays information about a remote device connected to a
port on this switch which is advertising LLDP-MED TLVs,
including network connectivity device, endpoint device,
capabilities, application type, and policy
268
PoE
3
Displays status of all LLDP PoE neighbors, including power
device type (PSE or PD), source of power, power priority, and
maximum required power
271
EEE Displays Energy Efficient Ethernet information advertised
through LLDP messages
272
Port Statistics Displays statistics for all connected remote devices, and
statistics for LLDP protocol packets crossing each port
273
PoE 3
Displays the status for all PoE ports, including the PD class,
requested power, allocated power, power and current used,
and PoE priority
275
MAC Table Displays dynamic and static address entries associated with
the CPU and each port
276
VLANs Virtual LANs 277
VLAN Membership Shows the current port members for all VLANs configured by
a selected software module
277
VLAN Port Shows the VLAN attributes of port members for all VLANs
configured by a selected software module which uses VLAN
management, including PVID, VLAN aware, ingress filtering,
frame type, egress filtering, and PVID
278
VCL VLAN Control List
MAC-based VLAN Displays MAC address to VLAN map entries 279
sFlow Displays information on sampled traffic, including the owner,
receiver address, remaining sampling time, and statistics for
UDP control packets and sampled traffic
280
Diagnostics 283
Ping Tests specified path using IPv4 ping 283
Ping6 Tests specified path using IPv6 ping 283
VeriPHY Performs cable diagnostics for all ports or selected port to
diagnose any cable faults (short, open etc.) and report the
cable length
285
Table 4: Main Menu (Continued)
Menu Description Page