LevelOne GEP-5070, User Manual

Page: 29 / 318

C
HAPTER
1
| Introduction
System Defaults
– 29 –
SNMP SNMP Agent Disabled
Community Strings “public” (read only)
“private” (read/write)
Traps Global: disabled
Authentication traps: enabled
Link-up-down events: enabled
SNMP V3 View: default_view
Group: default_rw_group
Port Configuration Admin Status Enabled
Auto-negotiation Enabled
Flow Control Disabled
Rate Limiting Input and output limits Disabled
Port Trunking Static Trunks None
LACP (all ports) Disabled
Storm Protection Status Broadcast: Enabled (1 kpps)
Multicast: disabled
Unknown unicast: disabled
Spanning Tree Algorithm Status Enabled, RSTP
(Defaults: RSTP standard)
Edge Ports Enabled
Address Table Aging Time 300 seconds
Virtual LANs Default VLAN 1
PVID 1
Acceptable Frame Type All
Ingress Filtering Disabled
Switchport Mode (Egress Mode) Access
Traffic Prioritization Ingress Port Priority 0
Queue Mode Strict
Weighted Round Robin Queue: 0 1 2 3 4 5 6 7
Weight: Disabled in strict mode
Ethernet Type Disabled
VLAN ID Disabled
VLAN Priority Tag Disabled
ToS Priority Disabled
IP DSCP Priority Disabled
TCP/UDP Port Priority Disabled
LLDP Status Enabled
Table 2: System Defaults (Continued)
Function Parameter Default