LevelOne GEP-5070, User Manual

Page: 243 / 318

C
HAPTER
5
| Monitoring the Switch
Displaying Information on Authentication Servers
– 243 –
D
ISPLAYING
I
NFORMATION ON
A
UTHENTICATION
S
ERVERS
Use the Monitor/Authentication pages to display information on RADIUS
authentication and accounting servers, including the IP address and
statistics for each server.
D
ISPLAYING A
L
IST OF
A
UTHENTICATION
S
ERVERS
Use the RADIUS Overview page to display a list of configured
authentication and accounting servers.
P
ATH
Monitor, Security, AAA, RADIUS Overview
P
ARAMETERS
These parameters are displayed:
◆
IP Address – The IP address and UDP port number of this server.
◆
Status – The current state of the server. This field takes one of the
following values:
■
Disabled – The server is disabled.
■
Not Ready – The server is enabled, but IP communication is not
yet up and running.
■
Ready – The server is enabled, IP communication is up and
running, and the RADIUS module is ready to accept access
attempts.
■
Dead (X seconds left) – Access attempts were made to this server,
but it did not reply within the configured timeout. The server has
been temporarily disabled, but will be re-enabled when the dead-
time expires. The number of seconds left before this occurs is
displayed in parentheses.
W
EB
I
NTERFACE
To display a list of configured authentication and accounting servers, click
Monitor, Security, AAA, RADIUS Overview.
Figure 116: RADIUS Overview