C
HAPTER
5
| Monitoring the Switch
Displaying Information About Security Settings
– 232 –
◆
VLAN ID
– The VLAN ID seen on this port.
◆
State
– Indicates whether the corresponding MAC address is blocked
or forwarding. In the blocked state, it will not be allowed to transmit or
receive traffic.
◆
Time of Addition
– Shows the date and time when this MAC address
was first seen on the port.
◆
Age/Hold
– If at least one user module has decided to block this MAC
address, it will stay in the blocked state until the hold time (measured
in seconds) expires. If all user modules have decided to allow this MAC
address to forward, and aging is enabled, the Port Security module will
periodically check that this MAC address is still forwarding traffic. If the
age period (measured in seconds) expires and no frames have been
seen, the MAC address will be removed from the MAC table. Otherwise
a new age period will begin.
If aging is disabled or a user module has decided to hold the MAC
address indefinitely, a dash (-) will be shown.
W
EB
I
NTERFACE
To display information about the MAC address learning through the Port
Security module, click Monitor, Security, Network, Port Security, Port.
Figure 108: Port Security Port Status
D
ISPLAYING
P
ORT
S
TATUS
FOR
A
UTHENTICATION
S
ERVICES
Use the Network Access Server Switch Status page to show the port status
for authentication services, including 802.1X security state, last source
address used for authentication, and last ID.
P
ATH
Monitor, Security, Network, NAS, Switch
P
ARAMETERS
These parameters are displayed:
◆
Port
– The switch port number. Click to navigate to detailed NAS
statistics for this port.
◆
Admin State
– The port's current administrative state. Refer to NAS
Admin State for a description of possible values (see
page 85
).
◆
Port State
– The current state of the port. Refer to NAS Port State for
a description of the individual states (see
page 85
).
◆
Last Source
– The source MAC address carried in the most recently
received EAPOL frame for EAPOL-based authentication, and the most
Summary of Contents for GEP-5070
