LevelOne GEP-5070, User Manual

Page: 117 / 318

C
HAPTER
4
| Configuring the Switch
Configuring Security
– 117 –
◆
MAC Address – Allowed source MAC address in ARP request packets.
◆
IP Address – Allowed source IP address in ARP request packets.
W
EB
I
NTERFACE
To configure the static ARP Inspection table:
1.
Click Advanced Configuration, Network, Security, ARP Inspection, Static
Table.
2.
Click “Add new entry.”
3.
Enter the required bindings for a given port.
4.
Click Save.
Figure 40: Configuring Static Bindings for ARP Inspection
S
PECIFYING
A
UTHENTICATION
S
ERVERS
Use the Authentication Server Configuration page to control management
access based on a list of user names and passwords configured on a
RADIUS or remote access authentication server, and to
authenticate client access for IEEE 802.1X port authentication (see
page 85 )
N
OTE
:
This guide assumes that RADIUS and servers have already
been configured to support AAA. The configuration of RADIUS and
server software is beyond the scope of this guide. Refer to the
documentation provided with the RADIUS and server software.
P
ATH
Advanced Configuration, Security, Network, AAA
P
ARAMETERS
These parameters are displayed:
Common Server Configuration
◆
Timeout – The time the switch waits for a reply from an authentication
server before it resends the request. (Range: 3-3600 seconds;
Default: 15 seconds)