LevelOne GEP-5070, User Manual

Page: 273 / 318

C
HAPTER
5
| Monitoring the Switch
Displaying LLDP Information
– 273 –
The respective echo values shall be defined as the local link partner’s
reflection (echo) of the remote link partner’s respective values. When a
local link partner receives its echoed values from the remote link
partner it can determine whether or not the remote link partner has
received, registered and processed its most recent values. For example,
if the local link partner receives echoed parameters that do not match
the values in its local MIB, then the local link partner infers that the
remote link partner’s request was based on stale information.
◆
Echo Rx Tw – The link partner's Echo Rx Tw value.
◆
Resolved Tx Tw – The resolved Tx Tw for this link (not the link
partner). The resolved value that is the actual “tx wakeup time” used
for this link (based on EEE information exchanged via LLDP).
◆ Resolved Rx Tw – The resolved Rx Tw for this link (not the link
partner). The resolved value that is the actual “tx wakeup time” used
for this link (based on EEE information exchanged via LLDP).
◆ EEE in Sync – Shows whether the switch and the link partner have
agreed on wake times.
■
Red - Switch and link partner have not agreed on wakeup times.
■
Green - Switch and link partner have agreed on wakeup times.
W
EB
I
NTERFACE
To display LLDP neighbor EEE information, click Monitor, LLDP, EEE.
Figure 142: LLDP Neighbor EEE Information
D
ISPLAYING
LLDP
P
ORT
S
TATISTICS
Use the LLDP Port Statistics page to display statistics on LLDP global
counters and control frames.
P
ATH
Monitor, LLDP, Port Statistics
P
ARAMETERS
These parameters are displayed:
Global Counters
◆
Neighbor entries were last changed at – The time the LLDP
neighbor entry list was last updated. It also shows the time elapsed
since last change was detected.
◆
Total Neighbors Entries Added – Shows the number of new entries
added since the switch was rebooted, and for which the remote TTL has
not yet expired.