LevelOne GEP-5070 User Manual Download Page 249

Page: 249 / 318

HAPTER

| Monitoring the Switch

Displaying Information on RMON

– 249 –

NTERFACE

To display RMON statistics, click Monitor, Security, Switch, RMON,

Statistics.

Figure 118: RMON Statistics

ISPLAYING

RMON

ISTORICAL

AMPLES

Use the RMON History Overview page to view statistics on a physical

interface, including network utilization, packet types, and errors.

ATH

Monitor, Security, Switch, RMON, History

ARAMETERS

These parameters are displayed:

◆

History Index

– Index of History control entry.

◆

Sample Index

– Index of the data entry associated with the control

entry.

◆

Sample Start

– The time at which this sample started, expressed in

seconds since the switch booted up.

◆

Utilization

– The best estimate of the mean physical layer network

utilization on this interface during this sampling interval, in hundredths

of a percent.

For a description of the other statistical parameters not included in this list,

see

"Displaying RMON Statistics" on page 247

Summary of Contents for GEP-5070































































































































































































































































































































Search results

Summary of Contents for GEP-5070

Reviews:

Related manuals for GEP-5070

Brands by name

Popular brands

LevelOne GEP-5070, User Manual

Search results

Summary of Contents for GEP-5070

Reviews:

Related manuals for GEP-5070

Brands by name

Popular brands