LevelOne GEP-5070, User Manual

Page: 262 / 318

C
HAPTER
5
| Monitoring the Switch
Showing IGMP Snooping Information
– 262 –
S
HOWING
IGMP S
NOOPING
I
NFORMATION
Use the IGMP Snooping pages to display IGMP snooping statistics, port
members of each service group, and information on source-specific groups.
S
HOWING
IGMP
S
NOOPING
S
TATUS
Use the IGMP Snooping Status page to display IGMP querier status,
snooping statistics for each VLAN carrying IGMP traffic, and the ports
connected to an upstream multicast router/switch.
P
ATH
Monitor, IPMC, IGMP Snooping, Status
P
ARAMETERS
These parameters are displayed:
Statistics
◆
VLAN ID – VLAN Identifier.
◆
Querier Version – IGMP version used by the switch when serving as
the IGMP querier.
◆
Host Version – IGMP version used when used by this switch when
serving as a host in IGMP proxy mode.
◆
Querier Status – Shows the Querier status as “ACTIVE” or “IDLE.”
When enabled, the switch can serve as the Querier, which is responsible
for asking hosts if they want to receive multicast traffic.
◆
Querier Transmitted – The number of transmitted Querier messages.
◆
Querier Received – The number of received Querier messages.
◆
V1 Reports Received – The number of received IGMP Version 1
reports.
◆
V2 Reports Received – The number of received IGMP Version 2
reports.
◆
V3 Reports Received – The number of received IGMP Version 3
reports.
◆
V2 Leaves Received – The number of received IGMP Version 2 leave
reports.
Router Port
◆
Port – Port Identifier.
◆
Status – Ports connected to multicast routers may be dynamically
discovered by this switch or statically assigned to an interface on this
switch.