LevelOne GEP-5070 User Manual Download Page 239

Page: 239 / 318

HAPTER

| Monitoring the Switch

Displaying Information About Security Settings

– 239 –

ISPLAYING

TATISTICS

FOR

DHCP S

NOOPING

Use the DHCP Snooping Port Statistics page to show statistics for various

types of DHCP protocol packets.

ATH

Monitor, Security, Network, DHCP, Snooping Statistics

ARAMETERS

These parameters are displayed:

◆

Tx Discover

– The number of discover (option 53 with value 1)

packets received and transmitted.

◆

Offer

– The number of offer (option 53 with value 2) packets

received and transmitted.

◆

Request

– The number of request (option 53 with value 3)

packets received and transmitted.

◆

Decline

– The number of decline (option 53 with value 4)

packets received and transmitted.

◆

ACK

– The number of ACK (option 53 with value 5) packets

received and transmitted.

◆

NAK

– The number of NAK (option 53 with value 6) packets

received and transmitted.

◆

Release

– The number of release (option 53 with value 7)

packets received and transmitted.

◆

Inform

– The number of inform (option 53 with value 8)

packets received and transmitted.

◆

Lease Query

– The number of lease query (option 53 with

value 10) packets received and transmitted.

◆

Lease Unassigned

– The number of lease unassigned (option

53 with value 11) packets received and transmitted.

◆

Lease Unknown

– The number of lease unknown (option 53

with value 12) packets received and transmitted.

◆

Lease Active

– The number of lease active (option 53 with

value 13) packets received and transmitted.

NTERFACE

To display DHCP Snooping Port Statistics:

Click Monitor, Security, Network, DHCP, Snooping Statistics.

Select a port from the scroll-down list.

Summary of Contents for GEP-5070































































































































































































































































































































Search results

Summary of Contents for GEP-5070

Reviews:

Related manuals for GEP-5070

Brands by name

Popular brands

LevelOne GEP-5070, User Manual

Search results

Summary of Contents for GEP-5070

Reviews:

Related manuals for GEP-5070

Brands by name

Popular brands