LevelOne GEP-5070, User Manual

Page: 158 / 318

C
HAPTER
4
| Configuring the Switch
Link Layer Discovery Protocol
– 158 –
C
ONFIGURING
MLD
F
ILTERING
Use the MLD Snooping Port Group Filtering Configuration page to filter
specific multicast traffic. In certain switch applications, the administrator
may want to control the multicast services that are available to end users;
for example, an IP/TV service based on a specific subscription plan. The
MLD filtering feature fulfills this requirement by denying access to specified
multicast services on a switch port.
P
ATH
Advanced Configuration, IPMC, MLD Snooping, Port Group Filtering
P
ARAMETERS
These parameters are displayed:
◆
Port – Port identifier.
◆
Filtering Groups – Multicast groups that are denied on a port. When
filter groups are defined, MLD listener reports received on a port are
checked against the these groups. If a requested multicast group is
denied, the MLD report is dropped.
W
EB
I
NTERFACE
To configure MLD Snooping Port Group Filtering:
1.
Click Configuration, IPMC, MLD Snooping, Port Group Filtering.
2.
Click Add New Filtering Group to display a new entry in the table.
3.
Select the port to which the filter will be applied.
4.
Enter the IP address of the multicast service to be filtered.
5.
Click Save.
Figure 61: MLD Snooping Port Group Filtering Configuration
L
INK
L
AYER
D
ISCOVERY
P
ROTOCOL
Link Layer Discovery Protocol (LLDP) is used to discover basic information
about neighboring devices on the local broadcast domain. LLDP is a Layer 2
protocol that uses periodic broadcasts to advertise information about the
sending device. Advertised information is represented in Type Length Value
(TLV) format according to the IEEE 802.1AB standard, and can include
details such as device identification, capabilities and configuration settings.