Lenovo DE120S Hardware Installation And Maintenance Manual Download

Page: 275 / 292

RecoveryFailureType - REC_PIT_VIEW_REPOSITORY_FULL ( pitVolumeRepositoryFull.html )

MEL_EV_VIEW_REPOSITORY_FAILED - 0x7806

This event occurs when: A failure has been detected with a view repository.

Event Name - View Repository Failed

Event description: Snapshot volume repository failed

Event Group - Pit Group Support

Event Priority - CRITICAL_EVENT

Log Group - System (0x0)

Event Category - Notification (0x4)

Event Component Type - Volume (0x0, 0xD), Consistency Group Snapshot Volume (0x3, 0x6)

Event Specific Data - Optional data is not provided with this event.

RecoveryFailureType - REC_PIT_VIEW_FAILED ( failedPiTVolume.html )

MEL_EV_PIT_PURGED - 0x7807

This event occurs when: A PiT has been purged.

Event Name - PiT Purged

Event description: Snapshot image purged

Event Group - Pit Group Support

Event Priority - CRITICAL_EVENT

Log Group - System (0x0)

Event Category - Notification (0x4)

Event Component Type - Snapshot Image (0x3, 0x3)

Event Specific Data - Optional data is provided with this event.

MEL_DATA_LBA_BLOCK

RecoveryFailureType - REC_PIT_PURGED ( pitPurged.html )

MEL_EV_TPV_REPOSITORY_FULL - 0x7B01

This event occurs when: A TPV Repository has no more capacity available to accept WRITE operations.

Event Name - TPV Repository Capacity Full

Event description: A thin volume repository is full

Event Group - Thin Provisioned Volume (TPV)

Chapter 5

System monitoring

269

Summary of Contents for DE120S





































































































































































































































































































Search results

Summary of Contents for DE120S

Reviews:

Related manuals for DE120S

Brands by name

Popular brands

Lenovo DE120S, Hardware Installation And Maintenance Manual

Search results

Summary of Contents for DE120S

Reviews:

Related manuals for DE120S

Brands by name

Popular brands