Lenovo DE120S Page 224 Hardware Installation And Maintenance Manual Download

Page: 224 / 292

Event Group - Configuration Manager

Event Priority - CRITICAL_EVENT

Log Group - System (0x0)

Event Category - Failure (0x2)

Event Component Type - Drive (0x0, 0x1)

Event Specific Data - Optional data is provided with this event.

MEL_DATA_DRIVE_FAILED

RecoveryFailureType - REC_FAILED_DRIVE ( failedDrive.html )

MEL_EV_DRIVE_IN_VG_OR_HOT_SPARE_REMOVED - 0x226D

This event occurs when: A drive that was assigned to a volume group or a hot spare drive that is in use has
been removed.

Event Name - Drive In Volume Group Or Hot Spare In Use Removed

Event description: Assigned drive or hot spare-in use drive removed

Event Group - Configuration Manager

Event Priority - CRITICAL_EVENT

Log Group - Drive (0x2)

Event Category - Failure (0x2)

Event Component Type - Drive (0x0, 0x1)

Event Specific Data - Optional data is not provided with this event.

RecoveryFailureType - REC_HOTSPARE_DRIVE_MISSING ( missingHotSpare.html )

MEL_EV_SSD_AT_END_OF_LIFE - 0x226E

This event occurs when: It is recommended that the customer schedule replacing the SSD immediately or
risk having the drive fail.

Event Name - SSD At End Of Life

Event description: Solid state disk drive at end of life

Event Group - Configuration Manager

Event Priority - CRITICAL_EVENT

Log Group - Drive (0x2)

Event Category - Notification (0x4)

Event Component Type - Drive (0x0, 0x1)

218

ThinkSystem DE Series Hardware Installation and Maintenance Guide for 2U Enclosures

Summary of Contents for DE120S





































































































































































































































































































Search results

Summary of Contents for DE120S

Reviews:

Related manuals for DE120S

Brands by name

Popular brands

Lenovo DE120S, Hardware Installation And Maintenance Manual

Search results

Summary of Contents for DE120S

Reviews:

Related manuals for DE120S

Brands by name

Popular brands