Lenovo DE120S Hardware Installation And Maintenance Manual Download

Page: 257 / 292

MEL_EV_SAS_PHY_DISABLED_LOCAL_WIDE_PORT - 0x5105

This event occurs when: A bad SAS PHY has disabled the local wide port.

Event Name - SAS PHY Disabled Local Wide Port

Event description: SAS PHY disabled local wide port

Event Group - Base Controller Diagnostic

Event Priority - CRITICAL_EVENT

Log Group - Controller (0x1)

Event Category - Failure (0x2)

Event Component Type - Channel (0x0, 0x6)

Event Specific Data - Optional data is provided with this event.

MEL_DATA_SASFI_PHY_ERROR_PHYNUM

RecoveryFailureType - REC_SAS_PHY_DISABLED_LOCAL_WIDE_PORT_DEGRADED (
chanSASPhyDisabledLocalWidePortDegraded.html )

MEL_EV_SAS_PHY_DISABLED_SHARED_WIDE_PORT - 0x5106

This event occurs when: A bad SAS PHY has disabled a shared wide port.

Event Name - SAS PHY Disabled Shared Wide Port

Event description: SAS PHY disabled shared wide port

Event Group - Base Controller Diagnostic

Event Priority - CRITICAL_EVENT

Log Group - Controller (0x1)

Event Category - Failure (0x2)

Event Component Type - Channel (0x0, 0x6)

Event Specific Data - Optional data is provided with this event.

MEL_DATA_SASFI_PHY_ERROR_PHYNUM

RecoveryFailureType - REC_SAS_PHY_DISABLED_SHARED_WIDE_PORT_DEGRADED (
chanSASPhyDisabledSharedWidePortDegraded.html )

MEL_EV_SPM_INVALID_HOST_OS_INDEX_DETECTED - 0x5222

This event occurs when: A host index has been detected that is considered to be invalid due to NVSRAM
settings.

Event Name - Invalid Host OS Index Detected

Event description: Invalid host OS index detected

Chapter 5

System monitoring

251

Summary of Contents for DE120S





































































































































































































































































































Search results

Summary of Contents for DE120S

Reviews:

Related manuals for DE120S

Brands by name

Popular brands

Lenovo DE120S, Hardware Installation And Maintenance Manual

Search results

Summary of Contents for DE120S

Reviews:

Related manuals for DE120S

Brands by name

Popular brands