manualshive.com logo in svg

Lenovo DE120S, Hardware Installation And Maintenance Manual

The Lenovo DE120S is a high-performance device designed for efficient computing. For hassle-free operation and upkeep, refer to the comprehensive Hardware Installation and Maintenance Manual available for free download at manualshive.com. This manual provides essential guidance for maximizing the potential of your Lenovo DE120S.

Share
Download
background image

You must apply a software feature pack before you can connect the new HIC ports to the data 
hosts. See 

Converting the Protocol of Host Ports

. Then, use the instructions in that document 

to connect the host ports to the data hosts and to resume operations. 

Step 6.  Connect the cables from the controller's host ports to the correct switch or data hosts.

Before you resume normal operations, ensure that you have completed the following steps: 

•  For iSCSI HIC adding or replacement: 

1.  Ensure that the iSCSI SFPs or dual-protocol SFPs are installed. 

2.  Attach cables to the SFPs, and confirm they are connected to the correct iSCSI switch or host.

3.  Power on the hosts.

4.  Configure the ISCSI hosts.

5.  Edit the host partition to update the iSCSI host port IDs.

6.  After the new iSCSI hosts reboot, use the applicable procedures on the hosts to register the volumes 

and to make them available to your operating system. 

•  For FC HIC adding or replacement. 

1.  Ensure that the FC SFPs or dual-protocol SFPs are installed. 

2.  Attach cables to the SFPs, and confirm they are connected to the correct FC switch or host.

3.  Power on the hosts.

4.  Configure the FC hosts.

5.  Edit the host partition to update the FC host port IDs.

6.  After the new FC hosts reboot, use the applicable procedures on the hosts to register the volumes 

and to make them available to your operating system. Depending on your operating system, two 
utilities are included with the storage management software (hot_add and SMdevices). These utilities 
help register the volumes with the hosts and also show the applicable device names for the volumes.

7.  You might need to use specific tools and options that are provided with your operating system to 

make the volumes available (that is, assign drive letters, create mount points, and so on). Refer to 
your host operating system documentation for details.

Upgrade host interface card

You upgrade a host interface card (HIC) to increase the number of host ports or to change host protocols. 
When you upgrade the HICs, you must power off the storage array, remove the existing HIC from each 
controller, install a new HIC, and reapply power.

Prepare to upgrade host interface cards

You prepare to upgrade host interface cards (HICs) by backing up the storage array's configuration 
database, collecting support data, and stopping host I/O operations. Then, you can power down the 
controller shelf.

Before you begin

•  You have scheduled a downtime maintenance window for this procedure. The power must be off when 

you install HICs, so you cannot access data on the storage array until you have successfully completed 
this procedure. (In a two-controller configuration, this is because both controllers must have the same HIC 
configuration when they are powered on.) 

•  You have installed ThinkSystem Storage Manager on a management station, so you can use the storage 

array's command line interface (CLI). 

Step 1.  From the Home of ThinkSystem System Manager, ensure that the storage array has Optimal status.  

130

ThinkSystem DE Series Hardware Installation and Maintenance Guide for 2U Enclosures

Summary of Contents for DE120S





































































































































































































































































































Reviews:

No comments

Related manuals for DE120S

VIPowER VPM-6228H User Manual preview
VPM-6228H
Brand: VIPowER Pages: 34
welland ME745K Quick Install Manual preview
ME745K
Brand: welland Pages: 2
Macally G-S350SU3 User Manual preview
G-S350SU3
Brand: Macally Pages: 15
Martin Audio Blackline F8 User Manual preview
Blackline F8
Brand: Martin Audio Pages: 31
QNAP TS-53BE Series Quick Installation Manual preview
TS-53BE Series
Brand: QNAP Pages: 9
QNAP TL-R1200S-RP Quick Installation Manual preview
TL-R1200S-RP
Brand: QNAP Pages: 16
MTX Bass Slammer TTP10 Directions preview
Bass Slammer TTP10
Brand: MTX Pages: 2
STI 7560AC Mounting Instructions preview
7560AC
Brand: STI Pages: 2
Icy Box IB-2535 User Manual preview
IB-2535
Brand: Icy Box Pages: 2
Rittal 9666.901 Assembly And Operating Instructions Manual preview
9666.901
Brand: Rittal Pages: 16
Rittal HD 1670.600 Assembly And Operating Instructions Manual preview
HD 1670.600
Brand: Rittal Pages: 34
Rittal AX IT 7641.350 Assembly And Operating Instructions Manual preview
AX IT 7641.350
Brand: Rittal Pages: 36
Rockwell Automation Allen-Bradley CENTERLINE 600 User Manual preview
Allen-Bradley CENTERLINE 600
Brand: Rockwell Automation Pages: 110
La Marche PC63 Series Instruction Manual preview
PC63 Series
Brand: La Marche Pages: 10
CRU RTX Secure 222-3QR User Manual preview
RTX Secure 222-3QR
Brand: CRU Pages: 9
i-tec M2SATA User Manual preview
M2SATA
Brand: i-tec Pages: 28
UGREEN CM335 Manual preview
CM335
Brand: UGREEN Pages: 24
QNAP TL-R400S User Manual preview
TL-R400S
Brand: QNAP Pages: 40

Brands by name

Popular brands

Load more brands