Lenovo DE120S Hardware Installation And Maintenance Manual Download

Page: 272 / 292

Event Group - Battery Manager

Event Priority - CRITICAL_EVENT

Log Group - System (0x0)

Event Category - Notification (0x4)

Event Component Type - Battery Pack (0x0, 0x9)

Event Specific Data - Optional data is provided with this event.

MEL_DATA_SMART_BATTERY

RecoveryFailureType - REC_EXPIRED_BATTERY ( batteryExpired.html )

MEL_EV_CACHE_BACKUP_DEVICE_FAILED - 0x7500

This event occurs when: The persistent cache backup device has failed.

Event Name - Cache Backup Device Failed

Event description: Persistent cache backup device has failed

Event Group - Persistent Cache Backup

Event Priority - CRITICAL_EVENT

Log Group - Controller (0x1)

Event Category - Failure (0x2)

Event Component Type - Cache Backup Device (0x2, 0xC)

Event Specific Data - Optional data is not provided with this event.

RecoveryFailureType - REC_CACHE_BACKUP_DEVICE_FAILED ( failedCacheBackupDev.html )

MEL_EV_CACHE_BACKUP_DEV_WRITE_PROTECTED - 0x7501

This event occurs when: Write protection is enabled on the cache backup device.

Event Name - Cache Backup Device Write-Protected

Event description: Cache backup device is write-protected

Event Group - Persistent Cache Backup

Event Priority - CRITICAL_EVENT

Log Group - Controller (0x1)

Event Category - Failure (0x2)

Event Component Type - Cache Backup Device (0x2, 0xC)

Event Specific Data - Optional data is not provided with this event.

266

ThinkSystem DE Series Hardware Installation and Maintenance Guide for 2U Enclosures

Summary of Contents for DE120S





































































































































































































































































































Search results

Summary of Contents for DE120S

Reviews:

Related manuals for DE120S

Brands by name

Popular brands

Lenovo DE120S, Hardware Installation And Maintenance Manual

Search results

Summary of Contents for DE120S

Reviews:

Related manuals for DE120S

Brands by name

Popular brands