manualshive.com logo in svg

Lenovo DE120S, Hardware Installation And Maintenance Manual

The Lenovo DE120S is a high-performance device designed for efficient computing. For hassle-free operation and upkeep, refer to the comprehensive Hardware Installation and Maintenance Manual available for free download at manualshive.com. This manual provides essential guidance for maximizing the potential of your Lenovo DE120S.

Share
Download
background image

Event Priority - CRITICAL_EVENT

Log Group - Drive (0x2)

Event Category - Notification (0x4)

Event Component Type - Drive (0x0, 0x1)

Event Specific Data - Optional data is not provided with this event.

RecoveryFailureType - REC_ADOPTION_FAILED_RAID_LEVEL_UNSUPPORTED ( 
sodAdoptFailUnsupportedRAID.html ), REC_DB_ADOPTION_HARD_LIMIT_EXCEEDED ( 
sodAdoptFailHardLimitExceeded.html ), REC_DRIVE_INCOMPATIBLE_DOWNREV_DACSTORE ( 
downrevDacstoreIncomplete.html ), REC_DRIVE_INCOMPATIBLE_SECTOR_SIZE ( sectorSizeIncompatible. 
html ), REC_DRIVE_INCOMPATIBLE_UPREV_DACSTORE ( uprevDacstoreIncomplete.html ), REC_ 
FOREIGN_DRIVE_INCONSISTENT ( pvgFrnDrvInconsConfig.html ), REC_FOREIGN_DRIVE_REFERS_TO_ 
NATIVE_DRIVE ( pvgFrnDrvRefsNatDrv.html ), REC_REPLACED_INSUFFICIENT_DRIVE_CAPACITY ( 
replacedDriveWrongType.html ), REC_INCOMPATIBLE_FAILED_LEGACY_DRIVE ( pvgFailedLegacyDrive. 
html ), REC_MULTIPLE_CONFIG_DATABASES_DETECTED ( sodAdoptFailMultipleConfDBs.html ), REC_ 
NATIVE_VG_FOREIGN_DRIVE_MUTUAL_REF ( pvgNatVgFrnDrvMutualRef.html ), REC_REPLACED_DRIVE_ 
WRONG_TYPE ( incorrectDriveType.html ), REC_VG_CLONED ( pvgVgCloned.html ), REC_VG_DRIVE_ 
PART_OF_MULTIPLE_VGS ( pvgMultVgsRefFrnDrv1.html ), REC_VG_HAS_DRIVE_PART_OF_MULTIPLE_ 
VGS ( pvgMultVgsRefFrnDrv2.html ), REC_DRIVE_UNSUPPORTED_PROTOCOL_CONNECTION ( SATA_ 
unsupported_protocol.html ), REC_DRIVE_INCOMPATIBLE_PI_TYPE ( driveIncompatiblePIType.html )

MEL_EV_FDE_LOCK_KEY_NEEDED - 0x226B

This event occurs when: A FDE lock key needed.

Event Name - FDE Lock Key Needed

Event description: Security (FDE) key needed

Event Group - Configuration Manager

Event Priority - CRITICAL_EVENT

Log Group - Drive (0x2)

Event Category - Notification (0x4)

Event Component Type - Drive (0x0, 0x1)

Event Specific Data - Optional data is provided with this event. 

MEL_DATA_LOCK_KEY_NEEDED

RecoveryFailureType - REC_SECURITY_GET_KEY ( securityGetKey.html )

MEL_EV_CFG_DRIVE_FAILURE - 0x226C

This event occurs when: A drive failure has been detected.

Event Name - Drive Failure

Event description: Drive failure

Chapter 5

.

System monitoring

217

Summary of Contents for DE120S





































































































































































































































































































Reviews:

No comments

Related manuals for DE120S

urmet domus 1148 Series Manual preview
1148 Series
Brand: urmet domus Pages: 8
Lindy 43184 User Manual preview
43184
Brand: Lindy Pages: 2
ZALMAN HD160XT Plus Manual preview
HD160XT Plus
Brand: ZALMAN Pages: 14
StarTech.com SM2E1BMU31C Quick Start Manual preview
SM2E1BMU31C
Brand: StarTech.com Pages: 2
OKW DATEC-CONTROL M Assembly Instruction Manual preview
DATEC-CONTROL M
Brand: OKW Pages: 16
Lenovo ThinkSystem E2 Manual preview
ThinkSystem E2
Brand: Lenovo Pages: 10
Lenovo Legion BoostStation 82CA000GGE Recommended Use Method preview
Legion BoostStation 82CA000GGE
Brand: Lenovo Pages: 2
Lenovo 90HU Hardware Maintenance Manual preview
90HU
Brand: Lenovo Pages: 63
Lenovo IdeaCentre 510A User Manual preview
IdeaCentre 510A
Brand: Lenovo Pages: 8
Lenovo ThinkSystem D2 Quick Start preview
ThinkSystem D2
Brand: Lenovo Pages: 2
Lenovo DE2000H Installation Instructions Manual preview
DE2000H
Brand: Lenovo Pages: 35
Lenovo S2200 Setup Manual preview
S2200
Brand: Lenovo Pages: 86
Lenovo E1012 Product Manual preview
E1012
Brand: Lenovo Pages: 21
Lenovo S3200 Product Manual preview
S3200
Brand: Lenovo Pages: 30
Lenovo ThinkAgile VX3720 7Y12 User Manual preview
ThinkAgile VX3720 7Y12
Brand: Lenovo Pages: 102
Lenovo ThinkSystem D3284 Hardware Installation And Maintenance Manual preview
ThinkSystem D3284
Brand: Lenovo Pages: 159
Lenovo NeXtScale n1200 Installation And Service Manual preview
NeXtScale n1200
Brand: Lenovo Pages: 878
AMX RADIA DIMMER ENCLOSURES WITH BREAKERS Installation Instructions preview
RADIA DIMMER ENCLOSURES WITH BREAKERS
Brand: AMX Pages: 2

Brands by name

Popular brands

Load more brands