Page 12 Leica EM TIC 3X Operating Manual 07/17
2.9
Safety information
2.9.1 General instructions
Danger!
The Leica EM TIC 3X Triple Ion Beam Cutter system can be handled safely and
easily provided it is operated in accordance with the instructions in this
manual.
Non-observance of these safety instructions may endanger people and the
system.
2.9.2 Design safety measures
All electronic components are protected by covers (doors, panels, etc.). These covers
must not be opened except for servicing by authorized Leica representative.
Caution!
There is a danger of electric shock when the cover is removed.
Injuries may be sustained that could lead to death.
The Leica EM TIC 3X Triple Ion Beam Cutter system must not be operated
unless all covers are properly in place.
Caution!
Some of the components inside the system may become hot and present a
danger of injury.
Burns may be sustained.
The Leica EM TIC 3X Triple Ion Beam Cutter system must not be operated
unless all covers are properly in place.
Caution!
When working with liquid nitrogen (LN
2
) please bear in mind LN
2
is extremely
cold. It boils at -196 °C. Nitrogen gas (GN
2
) escapes at very low temperature
from the boiling LN
2
. Both LN
2
and GN
2
as well as cooled elements (e.g. pipes,
valves, hoses, containers or stoppers) can cause severe frost bite and burns to
the skin and eyes.
Please pay particular attention to the safety information about the use of LN
2
!
