Leica EM TIC 3X Operating Manual Download Page 11

Page: 11 / 104

Page 7 Leica EM TIC 3X Operating Manual 07/17

This Dewar contains LN

, follow safety

procedures

when

handling

with

liquid

nitrogen.

Warning! Improper use of the instrument can
cause serious harm. Read the manual before
operating the system.

connection for the LN

tube from the LN

pump in case the system is equipped with the
cooling device.

Connection for ring LED or coaxial LED
illumination.

Port to connect a <= 16GB USB memory stick
for data up and download.

This  product  has  been  tested  to  the
requirements  of  CAN/CSA  C22.2  No.  61010-1,
second  edition,  including  Amendment  1,  or  a
later

version

the

same

standard

incorporating the same level of testing
requirements.

(left side of the instrument)

Summary of Contents for EM TIC 3X









































































































Search results

Summary of Contents for EM TIC 3X

Reviews:

Related manuals for EM TIC 3X

Brands by name

Popular brands

Leica EM TIC 3X, Operating Manual

Search results

Summary of Contents for EM TIC 3X

Reviews:

Related manuals for EM TIC 3X

Brands by name

Popular brands