Page 1 Leica EM TIC 3X Operating Manual 07/17
Foreword
This operating manual is intended to provide essential information about the proper
operation and servicing of the Leica EM TIC 3X Triple Ion Beam Cutter system. The
appendix helps with specific processing of solid samples for subsequent investigation
with an electron microscope (EM) or light microscope (LM).
This operating manual describes commissioning of the Leica EM TIC 3X Triple Ion
Beam Cutter system, phased testing and adjustment of all components and
movement sequences, and restoring the basic functionality.
Service and operating staff must familiarize themselves with all components of the
system before commissioning. Particular attention must be paid to the aspect of
safety.
This operating manual must be retained for future reference.
Texts, schedules and tables may not be copied, reproduced, or divulged to third
parties without our express consent.
It should be noted that this operating manual does not constitute a part of any
existing, prior agreement or covenant or legal relationship.
All obligations are derived from the purchase agreement, which is also the sole
document of record regarding the terms of the warranty. Contractual provisions are
not affected by the operating manual.
The documentation issued by the respective suppliers shall apply in addition to this
manufacturer's documentation (see attachment).
In addition, all generally applicable legal and otherwise binding regulations for
preventing accidents and protecting the environment must be observed and
communicated.
