Leica EM TIC 3X Operating Manual Download Page 54

Page: 54 / 104

Page 50 Leica EM TIC 3X Operating Manual 07/17

Connection of the LN

hose to the instrument

Connect the LN

hose with its threaded connection to the instrument.

Remove the yellow protective cup from the lower end of the pump. Slowly lower the
pump into the Dewar filled up with LN

. Hold the pump for a while until the strong

boiling decreases and carefully lower the pump until it is completely immersed.

The clean Dewar vessel has to be filled with LN

according to the safety

precautions.

Connect the LN

hose with its threaded connection to the LN

pump. Open the

shutter by pushing the lever before connecting the hose.

Please refer to the operating manual of the standard stage for proper usage.

Summary of Contents for EM TIC 3X









































































































Search results

Summary of Contents for EM TIC 3X

Reviews:

Related manuals for EM TIC 3X

Brands by name

Popular brands

Leica EM TIC 3X, Operating Manual

Search results

Summary of Contents for EM TIC 3X

Reviews:

Related manuals for EM TIC 3X

Brands by name

Popular brands