Leibinger JET3, Operating Manual

Page: 80 / 406

Page 78 Job Editor Group 8
Release 2.02 JET3 Series
6.5.3.2 Switching on with password protetction
Proceeding:
 Touch the dark Touch-Display (1) for at least 2 seconds.

The device turns on and the main window (3) is displayed with the message
<Initialization> (2) .
 After the initialization the device starts with the bleeding of the system automatically.
 During the process the message <Bleeding> (4) is displayed. The bleeding takes
between 1 – 5 min. The process can be canceled by pressing the button <Cancel>
(5) .
Note:
The start of the device happens in the logged-out status (no operator will be
logged on) but the job which has been used at last will be loaded automatically.
 The dialog field <Current login> (6) and a keyboard field (8) pops up.
INFORMATION
You will find further information regarding the operation with keyboard
in the
chapter 6.4.2 Keyboard
 Enter your password with the keyboard field.
 Press the button <Enter> (9) of the keyboard field to finish the input.

Now press the button <Login> (10) to finish the login.
 Now the user is logged-in and the active password level is displayed on top right of
the title bar (11) .
ATTENTION
The login can be also carried out without a password. In this case only
several basic functions of the device are available for the user.
You will find further information in the
chapter 7.3.5 Password settings
and user permissions