Leibinger JET3, Operating Manual

Page: 243 / 406

Group 8 Job Editor Page 241
JET3 Series Release 2.02
8.3.3 Close job editor
Figure 125 Close job editor
1 – Button <Job> 4 – Button <Cancel>
2 – Option <Close Editor> 5 – Button <No>
3 – Confirmation prompt 6 – Button <Yes>
With the option <Close Editor> you can close the job editor.
If changes were not already saved a confirmation prompt pops up.
In this case the following options are available:
 Press the button <Cancel> (4) to abort the process and to go back to the editor.
 Press the button <No> (5) to leave the editor without saving the job.
 Press the button <Yes> (6) to save the job when leaving the editor. Attention! The
saving happens under the current data file name. The existing data will be overwritten!
1
4
3
2
5
6