Page 296
Job Editor
Group 8
Release 2.02
JET3 Series
The height of the printout of the selected bar code type is defined with the
<Bar height>
(6)
setting. The height is measured in dots. The Printer printer is able to print up to 32
dots in vertical direction. Therefore
<Bar height>
can be set to a value between 0 and
32.
Bar code type code 39 with
different
<Bar height>
settings.
The height of the plain text
depends on the selected font.
In this example it is a 7x5 font.
Pushing the
<Default Settings>
button
(8)
will open the
<Barcode Format Default
Settings>
dialog box
(10)
. In this dialog box the default settings for the 3 preset
<Styles>
can be adjusted. There is a tab for each
<Style> (11-13)
. All changes confirmed with the
<OK>
button will be applied to the
<Style>
settings in the
<Barcode format>
dialog box.
The
<Cancel>
button will close the dialog box without changes.
For 2-D bar codes like the ECC200 code the
<Barcode format>
dialog box
(14)
offers
different options. For 2-D bar codes there are 3
<Styles>
available
(15)
. With the styles
the number of printed dots which are used per 2-D code square is defined.
<1x1> <Style>:
one square of the 2-D code is printed with 1 dot
(16)
.
<2x2> <Style>:
one square of the 2-D code is printed with 4 dots
(17)
.
<3x3> <Style>:
one square of the 2-D code is printed with 9 dots
(18)
Summary of Contents for JET3
Page 1: ...Operating Manual V2 02 Please keep for future reference ...
Page 2: ......
