Group 8
Job Editor
Page 273
JET3 Series
Release 2.02
Example:
Assumptions and pre settings for this example:
The Printer printer is used for continuously printing on a cable emerging from
a cable extruder device. The cable extruder mustn’t stop even if the
printout
fails. After a print interruption the printout should continue with the correct
meter number.
For this application an encoder is used for speed measuring and position
detection. The printout is carried out each meter and shows the current
number of meters.
Additionally a length measuring system has to provide a PrintGo signal after
each meter.
These settings fo
r the so called “meter counter” are shown in
Picture 13 - Print parameter for Meter-Go function
Picture 14 shows the Printer editor with the counter object and the settings
for the counter object in this example. The text object for the letter “m” is
just a standard object without any special settings for this example.
Picture 14- Settings of the counter object
Summary of Contents for JET3
Page 1: ...Operating Manual V2 02 Please keep for future reference ...
Page 2: ......
