Kwik Lok 893A ULTRA, Instruction Manual

Page: 29 / 106

P 4.3
SECTION IV
Operation
893 09 12
D. CLOSING BAGS:
Figure 4.5
To close bags:
1. Press the ”Run” button.
2. Set the closer belt speed, using the speed slide
located on the left side of the main control
screen:
Speed is measured as a percentage of the maxi-
mum speed. The current speed is shown in the sta-
tus section of the display. The maximum speed is
100%, while minimum speed is approximately 10%.
The closer should pull the bag slightly away from
the conveyor flight bar as the bag enters the closer
belts, and be completely closed when the flight bar
catches up.
Figure 4.5
Figure 4.6
Figure 4.7
Lok Check
(engaged)
NOTE: CLOSURE OPENING MUST FACE THE
ONCOMING PRODUCT. NOTE THE BACK OF
THE WEB OF THE END CLOSURE IS FREE TO
EXIT PAST THE REMAINING CLOSURE STRIP.
(Figure 4.6).
Breakoff lever
blade