82
Cleaning and care
Cleaning and care
Safety
The following applies to all cleaning and care work:
Observe safety instructions
Observe the safety instructions for the performance of all work. Any
disregard for safety instructions can lead to serious or fatal injuries to
persons.
Securing the implement
•
Before starting the cleaning work, always switch off the cardan
shaft and lock it out against accidental operation.
•
Secure the implement against rolling away by using wheel wedges.
•
The implement must be standing on firm and level ground and, if
necessary, must be supported during work.
Unsecured or non-supported implements can cause accidents.
Do not clean bearings or hydraulic parts with high pressure cle-
aners
Do not clean bearings or hydraulic parts with high pressure cleaners.
The high-pressure cleaner removes the grease film from the bare me-
tal surfaces. Metal surfaces treated with grease can corrode. After
each cleaning process, lubricate the bearing points and grease the ba-
re parts.
Clean the bearings and hydraulic parts carefully
Caution when cleaning with a high-pressure cleaner. Bearings, seals
and pipe unions are not waterproof. Avoid damaging the implement;
the bearings, seals and pipe unions must not come into direct contact
with the high pressure water jets.
Do not clean the electrical parts with high pressure
Do not clean the AutoPlus-Pilotbox, control box and electrical plug
connections with a high pressure cleaner. Moisture or water in electro-
nic devices can lead to leakage current, which results in malfunction.
Damage may be caused to the implement.
All manuals and user guides at all-guides.com