Kverneland Vicon RF 2235 Operating Manual Download

Page: 125 / 135

Eliminating malfunctions

125

Reversal of the

direction of rotation

When the direction of rotation is reversed, the tractor's PTO shaft must

be switched off. A PTO shaft running in the opposite direction of rota-

tion can cause damage to the implement.

In order to eliminate foreign bodies or blockages, the direction of rota-

tion of the production roller can be reversed. The crop is thrown out in

the opposite direction of conveying. The reversal is made by moving

the lever for free-wheeling. This function is only available in con-

junction with the PowerPush system.
> Switch off the tractor's PTO shaft.

> Uncouple the drive manually or hydraulically.

> Move the lever for free-wheeling.

The drive is now running in the opposite direction of conveying.

> Press the “INFO” button...

> ...until the “Pick-up/Knives” symbol is displayed.

> Press the “GO” button...

> until the “Pick-up/Knives” symbol is selected on the display.
Use the neutral position of the tractor's control device to turn the pro-

duction roller gradually.

> Check whether the blockage has been cleared.

> When the blockage has been cleared:

> Move the lever for free-wheeling back into the initial position.

> Couple the drive manually or hydraulically.

> Close and secure the side doors.

Opposite direc-

tion of rotation

Normal

direction of rotation

Lever

All manuals and user guides at all-guides.com

Summary of Contents for Vicon RF 2235








































































































































Search results

Summary of Contents for Vicon RF 2235

Reviews:

Related manuals for Vicon RF 2235

Brands by name

Popular brands

Kverneland Vicon RF 2235, Operating Manual

Search results

Summary of Contents for Vicon RF 2235

Reviews:

Related manuals for Vicon RF 2235

Brands by name

Popular brands