10
Safety
Meaning of
warning symbols
Read the operating manual
Read and observe the operating manual and the safety regulations
prior to commissioning! The machine may only be commissioned on-
ce the operating manual has been read and understood. This applies
in particular to the safety instructions.
Switch off the engine
Perform all maintenance, repair and adjusting work only when the im-
plement is at a standstill. Serious or fatal injury can be the result.
Maximum cardan shaft speed 540 rpm
The prescribed maximum cardan shaft speed of 540 rpm must not be
exceeded. The consequence could be damage to the implement.
Distance from the opened rear flap
Remain a safe distance away from the rear flap if the safety catch is
not activated. An unsecured rear flap may drop of its own accord. Se-
rious or fatal injury can be the result.
Distance from the slewing range
Remain a safe distance away from the slewing area and the deploy-
ment/retraction area. There is a risk of crushing. Serious or fatal injury
can be the result.
Caution regarding the knife area
Remain a safe distance away from the knife area. There is a danger
of being crushed and cut by the knives or sharp edges. This could
otherwise result in serious injury.
All manuals and user guides at all-guides.com
