Kubota ME8200DTN, Workshop Manual Supplement

Page: 67 / 192

ME8200DTN, WSM TRANSMISSION
N3-S3
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-10.)
Item ft-lbs
ROPS frame (L and R) 196.1 to 225.6 20.0 to 23.0 144.7 to 166.4
Foldable ROPS 29.4 to 49.0 3.0 to 5.0 21.7 to 36.2
Power steering hose retaining nut 24.5 to 29.4 2.5 to 3.0 18.1 to 21.7
Starter's terminal B mounting nut 8.8 to 11.8 0.9 to 1.2 6.5 to 8.7
Bonnet support mounting screw 48.1 to 55.8 4.9 to 5.7 35.5 to 41.2
Support frame mounting screw 48.1 to 55.8 4.9 to 5.7 35.5 to 41.2
Engine and clutch housing mounting screw, nut 77.5 to 90.2 7.9 to 9.2 57.1 to 66.5
Engine and clutch housing mounting stud bolt 38.2 to 45.1 3.9 to 4.6 28.2 to 33.3
Cover mounting screw 77.5 to 90.2 7.9 to 9.2 57.1 to 66.5
Rear wheel mounting nut 260 to 304 26.5 to 31.0 192 to 224
Rear ROPS mounting U-bolt 196 to 225 20 to 23 144.7 to 166.4
Step mounting screw 48.1 to 55.9 4.9 to 5.7 35.5 to 41.2
Clutch housing and transmission case mounting screw,
nut M12, grade 11 nut
103.0 to 117.7 10.5 to 12.0 75.9 to 86.8
(Ditto) M12, grade 7 screw, nut 77.5 to 90.2 7.9 to 9.2 57.1 to 66.5
(Ditto) M10, grade 9 screw 60.8 to 70.6 6.2 to 7.2 44.8 to 52.1
Clutch housing and transmission case mounting stud
bolt
38.2 to 45.1 3.9 to 4.6 28.2 to 33.3
Transmission upper cover mounting screw 23.5 to 27.5 2.4 to 2.8 17.4 to 20.3
Speed change cover mounting screw 23.5 to 27.5 2.4 to 2.8 17.4 to 20.3
Release fork setting screw 166.7 to 186.3 17.0 to 19.5 122.9 to 137.4
Shuttle case mounting screw M8, grade 7 screw 23.5 to 27.4 2.4 to 2.8 17.4 to 20.3
(Ditto) M8, grade 9 screw 29.4 to 34.3 3.0 to 3.5 21.7 to 25.3
Hydraulic cylinder assembly mounting screw and nut 77.5 to 90.2 7.9 to 9.2 57.1 to 66.5
Rear axle case mounting screw and nut (M12 screw) 77.5 to 90.2 7.9 to 9.2 57.1 to 66.5
PTO shaft staking nut 225.5 to 264.8 23 to 27 166.4 to 195.3
PTO gear case assembly mounting screw 77.5 to 90.2 7.9 to 9.2 57.1 to 66.5
PTO gear case cover mounting screw and reamer screw 77.5 to 90.2 7.9 to 9.2 57.1 to 66.5
Differential bearing support mounting screw 48.1 to 55.9 4.9 to 5.7 35.4 to 41.2
Differential case cover mounting screw 48.1 to 55.9 4.9 to 5.7 35.4 to 41.2
Spiral bevel gear UBS screw 70.6 to 90.2 7.2 to 9.2 52.1 to 86.5
PTO clutch valve mounting screw 23.5 to 27.5 2.4 to 2.8 17.4 to 20.3
PTO clutch holder mounting screw 23.5 to 27.5 2.4 to 2.8 17.4 to 20.3
Spiral bevel pinion shaft staking nut 117.7 to 127.5 12 to 13 86.8 to 94.0
0000003457E
KiSC issued 04, 2006 A