Kubota ME8200DTN, Workshop Manual Supplement

Page: 19 / 192

ME8200DTN, WSM GENERAL
NG-6
4. CHECK AND MAINTENANCE
[1] DAILY CHECK
To prevent trouble from occurring, it is important to know the condition of the tractor. Check the following items
before starting.
A
Be sure to check and service the tractor on a flat place with engine shut off, the parking brake on and
chock the wheels.
0000000633E
Checking
A
Check areas where previous trouble was experienced.
A
Walk around the tractor.
1. Check the tire pressure, and check for wear and damage.
2. Check for oil and water leak.
3. Check the engine oil level.
4. Check the transmission fluid level.
5. Check the coolant level.
6. Check the water separator.
7. Check air cleaner evacuator valve (when used in a dusty place).
8. Check the condition of seat belt and ROPS attaching hardware.
9. Check and clean the radiator screen and grill.
10. Check the dust and chaff accumulated between the battery and radiator.
11. Check the nuts of tires are tight.
12. Check the number plate or SMV emblem for damage and replace as necessary if equipped.
13. Care of danger, warning and caution labels.
14. Clean around the exhaust manifold and the muffler of the engine.
A
While sitting in the operator's seat.
1. Check the throttle pedal, brake pedal and clutch pedal.
2. Check the throttle lever and shuttle lever.
3. Check the parking brake.
4. Check the steering wheel.
A
Turning the key switch.
1. Check the performance of the easy checker lights.
2. Check the head lights, turn signal lights, hazard lights and other light equipment. Clean if necessary.
3. Check the performance of the meters and gauges.
4. Check the amount of fuel by fuel gauge.
A
Starting the engine.
1. Check to see that the lights on the easy checker go off.
2. Check the color of the exhaust gas.
3. Check the brakes for proper operation.
0000003597E
KiSC issued 04, 2006 A