Kubota ME8200DTN, Workshop Manual Supplement

Page: 120 / 192

ME8200DTN, WSM BRAKES
N5-S3
3. CHECKING, DISASSEMBLING AND SERVICING
[1] CHECKING AND ADJUSTING
Brake Pedal Free Travel
A
Stop the engine and remove the key, then choke the wheel
before checking brake pedal.
1. Release the parking brake.
2. Slightly depress the brake pedals and measure free travel (A)
at top of pedal stroke.
3. If the measurement is not within the factory specifications,
loosen the lock nut (1) and turn the turnbuckle (2) to adjust the
rod length within acceptable limits.
A
Keep the free travel in the right and left brake pedals
equal.
Parking Brake Lever Free Play
A
Stop the engine and chock the wheels before checking
parking brake.
1. Release the parking brake lever (1).
2. Loosen the lock nut (2) on the parking brake rod (3).
3. Adjust the parking brake rod length to achieve the reference
value.
4. Tighten the lock nut (2).
5. Pull the parking brake lever (1) just one notch and make sure
the parking brake shaft (5) is activated.
A
After adjusting the parking brake lever free play
- Right and left parking brake for even braking.
- With the parking brake released, make sure that the right
and lefet tires do not drag on.
Brake pedal free travel
(A)
Factory spec.
40 to 45 mm
1.6 to 1.8 in.
(1) Lock Nut (2) Turnbuckle
0000003511E
Parking brake rod length
(L)
Reference value
180 to 184 mm
7.09 to 7.25 in.
(1) Parking Brake Lever (5) Parking Brake Shaft
(2) Lock Nut A : PULL
(3) Parking Brake Rod B : RELEASE
(4) Brake Lever
0000003512E
KiSC issued 04, 2006 A