Kubota ME8200DTN, Workshop Manual Supplement

Page: 100 / 192

ME8200DTN, WSM TRANSMISSION
N3-S36
Clearance between Differential Pinion Shaft and Differential
Pinion
1. Measure the differential pinion shaft O.D.
2. Measure the differential pinion I.D. and calculate the
clearance.
3. If the clearance exceed the allowable limit, replace them.
Backlash between Differential Pinion and Differential Side Gear
1. Set a dial indicator (lever type) on the tooth of the differential
pinion.
2. Hold the differential side gear and move the differential pinion
to measure the backlash.
3. If the measurement is not within the factory specifications,
adjust with the differential side gear washer.
(Reference)
A
Thickness of differential side gear washer :
1.5 mm (0.059 in.) 1.7 mm (0.067 in.)
1.6 mm (0.063 in.) 1.8 mm (0.079 in.)
2.0 mm (0.079 in.)
Clearance between
differential pinion shaft
and differential pinion
Factory spec.
0.060 to 0.102 mm
0.00236 to 0.00402 in.
Allowable limit
0.25 mm
0.010 in.
Differential pinion shaft
O.D.
Factory spec.
19.959 to 19.980 mm
0.78579 to 0.78661 in.
Differential pinion I.D. Factory spec.
20.040 to 20.061 mm
0.78898 to 0.78980 in.
0000003498E
Backlash between
differential pinion and
differential side gear
Factory spec.
0.15 to 0.30 mm
0.0059 to 0.0118 in.
Allowable limit
0.4 mm
0.016 in.
0000003499E
KiSC issued 04, 2006 A