Kubota ME8200DTN, Workshop Manual Supplement

Page: 160 / 192

ME8200DTN, WSM HYDRAULIC SYSTEM
N8-S4
2. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-10.)
Item ft-lbs
Rear wheel mounting nut 260 to 304 26.5 to 31.0 192 to 224
Rear ROPS mounting U-bolt 196 to 225 20 to 23 144.7 to 166.4
Delivery pipe retaining nut 39.2 to 49.0 4.0 to 5.0 28.9 to 36.2
Hydraulic cylinder assembly mounting screw and nut 77.5 to 90.2 7.9 to 9.2 57.1 to 66.5
Control valve mounting screw 19.6 to 23.5 2.0 to 2.4 14.5 to 17.4
Lock nut for poppet valve 17.7 to 21.6 1.8 to 2.2 13.0 to 15.9
Seat plug for poppet valve 68.6 to 88.3 7.0 to 9.0 50.6 to 65.1
Plug for unload valve 68.6 to 88.3 7.0 to 9.0 50.6 to 65.1
Set plug for check valve 49.0 to 58.8 5.0 to 6.0 36.2 to 43.4
Bracket guide mounting screw 23.5 to 27.5 2.4 to 2.8 17.4 to 20.3
Hydraulic arm setting screw 39.2 to 45.0 4.0 to 4.6 29.0 to 33.3
Relief valve for three point hydraulic system 34.3 to 39.2 3.5 to 4.0 25.3 to 28.9
Cylinder safety valve assembly 39.2 to 49.0 4.0 to 5.0 28.9 to 36.2
Cylinder safety valve lock nut 58.8 to 78.5 6.0 to 8.0 43.4 to 57.9
0000003555E
KiSC issued 04, 2006 A