Kubota ME8200DTN, Workshop Manual Supplement

Page: 85 / 192

ME8200DTN, WSM TRANSMISSION
N3-S21
Draining Transmission Fluid
1. Place oil pans underneath the transmission case.
2. Remove the drain plugs (1).
3. Drain the transmission fluid.
4. Reinstall the drain plugs (1).
(When reassembling)
A
Fill up from filling port after removing the filling plug until
reaching the dipstick.
A
After running the engine for few minutes, stop it and check the
fluid level again, add the fluid to prescribed level if it is not
correct level.
A
Use only KUBOTA SUPER UDT fluid. Use of other oils
may damage the transmission or hydraulic system.
A
Refer to "LUBRICANTS, FUEL AND COOLANT" (See
page NG-2.)
A
Do not mix different brands fluid together.
(D) Separating 4WD / Bi-speed Turn Clutch Assembly
Transmission fluid Capacity
33.0 L
34.88 U.S.qts
29.04 lmp.qts
(1) Drain Plug
0000003479E
KiSC issued 04, 2006 A