Kubota ME8200DTN, Workshop Manual Supplement

Page: 130 / 192

ME8200DTN, WSM FRONT AXLE
N6-S3
2. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-10.)
Item ft-lbs
Power steering hose retaining nut 24.5 to 29.4 2.5 to 3.0 18.1 to 21.7
Cylinder cover 48.1 to 55.8 4.9 to 5.7 35.5 to 41.2
Tie-rod joint and steering cylinder mounting screw 166.7 to 196.1 17.0 to 20.0 122.9 to 144.6
Front wheel mounting nut 166.7 to 196.1 17.0 to 20.0 122.9 to 144.6
Front bracket and rear bracket mounting screw 77.5 to 90.2 7.9 to 9.2 57.1 to 66.5
Front bracket and rear bracket mounting nut 77.5 to 90.2 7.9 to 9.2 57.1 to 66.5
Tie-rod end nut 77.5 to 90.2 7.9 to 9.2 57.1 to 66.5
Bevel gear case mounting screw 166.7 to 196.1 17.0 to 20.0 122.9 to 144.6
Front axle rocking force adjusting screw 19.6 to 29.4 2.0 to 3.0 14.5 to 21.7
Front axle rocking force adjusting lock nut 98.1 to 147.1 10.0 to 15.0 72.3 to 108.5
Front wheel case support mounting screw 127.5 to 142.2 13.0 to 14.5 94.0 to 104.9
Front wheel case cover mounting screw 29.4 to 34.3 3.0 to 3.5 21.7 to 25.3
Differential case cover mounting screw 60.8 to 70.6 6.2 to 7.2 44.8 to 52.1
0000003521E
KiSC issued 04, 2006 A