Kubota ME8200DTN, Workshop Manual Supplement

Page: 89 / 192

ME8200DTN, WSM TRANSMISSION
N3-S25
(2) Servicing
4WD / Bi-speed Turn Clutch Disc Wear
1. Measure the thickness of clutch disc with vernier calipers.
2. If the thickness is less than the allowable limit, replace it.
4WD / Bi-speed Turn Drive Plate Wear
1. Measure the thickness of drive plate with vernier calipers.
2. If the thickness is less than the allowable limit, replace it.
Flatness of 4WD / Bi-speed Turn Piston and 4WD / Bi-speed Turn
Drive Plate
1. Place the part on a surface plate.
2. Check it unable to insert a feeler gauge (allowable limit size)
underneath it at least four points.
3. If the feeler gauge can be inserted, replace it.
Thickness of clutch disc
Factory spec.
1.70 to 1.90 mm
0.067 to 0.075 in.
Allowable limit
1.55 mm
0.061 in.
0000003484E
Thickness of drive plate
Factory spec.
1.15 to 1.25 mm
0.045 to 0.049 in.
Allowable limit
1.10 mm
0.043 in.
0000003485E
Flatness of 4WD / Bi-
speed turn piston
Allowable limit
0.15 mm
0.006 in.
Flatness of 4WD / Bi-
speed turn drive plate
Allowable limit
0.30 mm
0.012 in.
0000003486E
KiSC issued 04, 2006 A