6-S12
L4400 , WSM
FRONT AXLE
Knuckle Shaft and Front Axle, Out
1. Remove the knuckle arm (1) and draw out the knuckle shaft (4)
from the front axle.
2. Remove the front axle, out (3).
(When reassembling)
• Apply grease to the knuckle shaft (2) and thrust collar (4), (5).
• Do not interchange right and left knuckle arms.
• Be sure to install the thrust collars (4), (5) so that groove side is
downward.
• Be sure to align the hole of thrust collars (4), (5) and knock pin
(6), (7).
• A large size thrust collar (5) must be lower side.
W1022750
Steering Cylinder
1. Remove the clamps (4) and remove the steering cylinder (2).
2. Remove the bracket mounting screw and nut and remove the
front axle, middle (3).
(When reassembling)
W1023704
Tightening torque
Knuckle arm mounting bolt
and nut
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.2 to 66.5 ft-lbs
Front axle, out mounting
bolt and nut
123 to 147 N·m
12.6 to 15.0 kgf·m
91.1 to 108.5 ft-lbs
(1) Knuckle Arm
(2) Knuckle Shaft
(3) Front Axle, Out
(4) Thrust Collar
(5) Front Wheel Hub Slotted Nut
(6) Knock Pin
(7) Knock Pin
Tightening torque
Bracket mounting screw
and nut
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.2 to 66.5 ft-lbs
(1) Bracket, Front
(2) Steering Cylinder
(3) Front Axle, Middle
(4) Clamp
(5) Bracket, Rear
KiSC issued 07, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
