Kubota L4400, Workshop Manual

Page: 159 / 385

2-S15
L4400 , WSM CLUTCH
[2] PREPARATION
(1) Separating Engine from Clutch Housing
Draining the Transmission Fluid
1. Place oil pans underneath the transmission case.
2. Remove the drain plugs (1), (2).
3. Drain the transmission fluid.
4. Reinstall the drain plugs (1), (2).
(When refilling)
• Fill up new oil from the oil filling port (3) up to the upper line of the
oil level gauge (4).
• After running the engine for few minutes, stop it and check the oil
level again, add oil to prescribed level, if necessary.
IMPORTANT
■
• Use only multi-grade transmission fluid. Use of other fluides
may damage the transmission or hydraulic system.
• Refer to "LUBRICANTS, FUEL AND COOLANT". (See page
G-8.)
• Never work the tractor immediately after changing the
transmission fluid. Keeping the engine at medium speed for
a few minutes to prevent damage to the transmission.
• Do not mix different brands of oil together.
Transmission fluid Capacity
40 L
10.6 U.S.qts
8.8 Imp.gals
(1) Drain Plug
(2) Drain Plug
(3) Oil Filling Port
(4) Oil Level Gauge A : Oil level is acceptable within this
range.
KiSC issued 07, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland