3-S39
L4400 , WSM
TRANSMISSION
Adjustment
1. Adjust (shorten) the turnbuckle (H) (3) so that the length (A)
becomes 1 to 5 mm (0.04 to t0.2 in.).
2. Repeat shifting in a sequence of (H
→
L
→
H
→
R
→
H) and
confirm the shifting is possible.
1) If shifting to the directions of left and right (H
→
L and L
→
H)
is possible, the adjustment has been completed.
2) When shifting to the directions of left and right is not possible,
this is because the drift (C) in the forward and backward of the
arm (H) (2) and arm (L - R) (4) in the neutral position has become
too large. So make adjustment to the turnbuckle (L - R) (5) to
correct the drift.
3) Again, check by shifting and complete the adjustment.
NOTE
■
• Lock securely the lock screws of adjusted turnbuckle to
prevent from becoming loose.
W10785670
Length of the rod
(B)
Reference value
85 mm
3.35 in.
Tightening torque
Turnbuckle (3) (5) lock
screw
39.2 to 45.1 N·m
4.0 to 4.6 kgf·m
28.9 to 33.3 ft-lbs
(1) Range Gear Shift Lever
(2) Arm (H)
(3) Turnbuckle (H)
(4) Arm (L - R)
(5) Turnbuckle (L - R)
B : Length of the rod
C : Drift of arm in forward and
backward directions
KiSC issued 07, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
