2-S9
L4400 , WSM
CLUTCH
Wiring, Pipes and Rods
1. Disconnect 1P connector (1) to water temperature sensor.
2. Disconnect glow plug terminal (10).
3. Disconnect accelerator rod cable (2), head light wiring (8), 2P
connector to key stop solenoid (9) and then set aside the wiring
harness.
4. Disconnect power steering delivery hose (4), power steering
return hose (3).
5. Disconnect pump inlet hose (5), I-PTO delivery pipe (6) and 3P
delivery pipe (7).
(When reassembling)
W1065019
Wirings
1. Disconnect 1P battery connector (1) and remove slow blow fuse
boxes (2).
2. Disconnect 2P connector (3) to alternator and wings (4).
3. Disconnect 1P connector (5) to Starter motor and B terminal (6).
4. Disconnect 1P connector (7) to engine oil pressure switch, then
set aside the wiring harness.
W1065603
Tightening torque
Independent PTO delivery
pipe joint bolt
34.3 to 39.2 N·m
3.5 to 4.0 kgf·m
25.3 to 28.9 ft-lbs
Power steering delivery
hose joint bolt
49.0 to 58.8 N·m
5.0 to 6.0 kgf·m
36.2 to 43.4 ft-lbs
(1) 1P Connector (Water Temperature
Sensor)
(2) Accelerator Rod Cable
(3) Power Steering Return Hose
(4) Power Steering Delivery Hose
(5) Pump Inlet Hose
(6) I-PTO Delivery Pipe
(7) 3P Delivery Pipe
(8) Head Light Wiring
(9) 2P Connector (Key Stop Solenoid)
(10) Glow Plug Terminal
(1) 1P Connector (Battery)
(2) Slow Blow Fuse Box
(3) 2P Connector (Alternator)
(4) Wiring (Alternator)
(5) 1P Connector (Starter Motor)
(6) B Terminal (Starter)
(7) 1P Connector (Engine Oil Pressure
Switch)
KiSC issued 07, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
