3-S20
L4400 , WSM
TRANSMISSION
[2] DISASSEMBLING AND ASSEMBLING
(1) Clutch Housing
Clutch Lever, Release Fork and Release Bearing
1. Remove the release fork mounting screws (2).
2. Draw out the clutch lever (3) to remove the release fork (1).
3. Remove the release bearing (4) together with release holder.
(When reassembling)
• Apply grease to the sliding surface of the clutch release hub.
• Apply grease to the clutch lever.
W1014296
Shaft Case
1. Remove the shaft case mounting screws.
2. Remove the shaft case (1) by using two jack screws M6.
(When reassembling)
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
surface of the shaft case and clutch housing case after
eliminating the water, oil and stuck liquid gasket.
(When replacing oil seal in shaft case)
• Install the oil sea (3) as shown in the figure, noting its direction.
• Apply grease to the oil seal (3).
W1017592
Tightening torque
Release fork mounting
screw
23.5 to 27.5 N·m
2.4 to 2.8 kgf·m
17.4 to 20.3 ft-lbs
(1) Release Fork
(2) Release Fork Mounting Screw
(3) Clutch Lever
(4) Release Bearing
Tightening torque
Release fork setting screw
23.5 to 27.5 N·m
2.4 to 2.8 kgf·m
17.4 to 20.3 ft-lbs
(1) Shaft Case
(2) Jack Screw M6
(3) Oil Seal
KiSC issued 07, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
