8-S13
L4400 , WSM
HYDRAULIC SYSTEM
Adjusting Draft Control Rod (If Equipped)
1. Set the draft control lever (1) to the lowest position.
2. Adjust the position control feedback rod. (Refer to "Adjusting
Position Control Feedback Rod" See page 8-S12).
3. Start the engine.
4. Move the position control lever and adjust so that the lower link
is level.
5. Set the rear side (A) of the draft control lever (1) to the scale 1 of
the lever guide. (Refer to the figure left.).
6. Set the engine speed at the maximum.
7. Attach the test bar (3) (see page G-48) to the top link bracket (2).
8. Pull the test bar (3) upward and adjust the draft control rod (6) so
that the lower link is raised when the top link bracket (2) and the
top link bracket holder (5) come in contact. (Confirm that the
lower link is lowered when the test bar (3) is pushed downward.)
9. Confirm that the draft control will not operate (float) when the
draft control lever (1) is set to lowest position (B).
10.After adjustment, tighten the lock nut firmly.
W1020380
(1) Draft Control lever
(2) Top Link Bracket
(3) Test Bar
(4) Weight
(5) Top Link Bracket Holder
(6) Draft Control Rod
KiSC issued 07, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland