7-S13
L4400 , WSM
STEERING
Steering Cylinder
1. Disconnect the power steering hoses (1).
2. Remove the cylinder clamps (2).
3. Take out the steering cylinder (3).
4. Remove the tie-rod joints (4).
5. Carefully clamp the steering cylinder in a vise.
6. Remove the guide assembly (7) and draw out the cylinder rod (8).
(When reassembling)
• Apply transmission fluid to the oil seal and O-ring.
• Apply molybdenum disulfide (Three Bond 1901 or equivalent) on
the screw of guide assembly when tighten it.
• After tightening the guide assembly to the specified torque, stake
the cylinder firmly.
• Apply liquid lock (Three Bond 1324B or equivalent) to the thread
of tie-rod joint (4).
W1019025
Tightening torque
Power steering hose
retaining nut
24.5 to 29.4 N·m
2.5 to 3.0 kgf·m
18.1 to 21.7 ft-lbs
Tie-rod joint
166.7 to 196.1 N·m
17.0 to 20.0 kgf·m
123.0 to 144.7 ft-lbs
Tie-rod clamp mounting
bolt and nut
60.8 to 70.6 N·m
6.2 to 7.2 kgf·m
44.8 to 52.1 ft-lbs
Tie-rod end lock nut
166.7 to 196.1 N·m
17.0 to 20.0 kgf·m
123.0 to 144.7 ft-lbs
Guide assembly
181.1 to 288.9 N·m
18.5 to 29.5 kgf·m
133.6 to 213.1 ft-lbs
(1) Power Steering Hose
(2) Cylinder Clamp
(3) Steering Cylinder
(4) Tie-rod Joint
(5) Tie-rod Clamp
(6) Lock Nut
(7) Guide Assembly
(8) Cylinder Rod
KiSC issued 07, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland